Recipe for target run failed что значит
Here is a list of the more common errors you might see generated by make , and some information about what they mean and how to fix them.
Sometimes make errors are not fatal, especially in the presence of a — prefix on a recipe line, or the -k command line option. Errors that are fatal are prefixed with the string *** .
Error messages are all either prefixed with the name of the program (usually ‘ make ’), or, if the error is found in a makefile, the name of the file and line number containing the problem.
In the table below, these common prefixes are left off.
‘ [ foo ] Error NN ’ ‘ [ foo ] signal description ’
These errors are not really make errors at all. They mean that a program that make invoked as part of a recipe returned a non-0 error code (‘ Error NN ’), which make interprets as failure, or it exited in some other abnormal fashion (with a signal of some type). See Errors in Recipes.
If no *** is attached to the message, then the sub-process failed but the rule in the makefile was prefixed with the — special character, so make ignored the error.
‘ missing separator. Stop. ’ ‘ missing separator (did you mean TAB instead of 8 spaces?). Stop. ’
This means that make could not understand much of anything about the makefile line it just read. GNU make looks for various separators ( : , = , recipe prefix characters, etc.) to indicate what kind of line it’s parsing. This message means it couldn’t find a valid one.
One of the most common reasons for this message is that you (or perhaps your oh-so-helpful editor, as is the case with many MS-Windows editors) have attempted to indent your recipe lines with spaces instead of a tab character. In this case, make will use the second form of the error above. Remember that every line in the recipe must begin with a tab character (unless you set .RECIPEPREFIX ; see Special Variables). Eight spaces do not count. See Rule Syntax.
‘ recipe commences before first target. Stop. ’ ‘ missing rule before recipe. Stop. ’
This means the first thing in the makefile seems to be part of a recipe: it begins with a recipe prefix character and doesn’t appear to be a legal make directive (such as a variable assignment). Recipes must always be associated with a target.
The second form is generated if the line has a semicolon as the first non-whitespace character; make interprets this to mean you left out the "target: prerequisite" section of a rule. See Rule Syntax.
‘ No rule to make target ` xxx ‘. ’ ‘ No rule to make target ` xxx ‘, needed by ` yyy ‘. ’
This means that make decided it needed to build a target, but then couldn’t find any instructions in the makefile on how to do that, either explicit or implicit (including in the default rules database).
If you want that file to be built, you will need to add a rule to your makefile describing how that target can be built. Other possible sources of this problem are typos in the makefile (if that file name is wrong) or a corrupted source tree (if that file is not supposed to be built, but rather only a prerequisite).
‘ No targets specified and no makefile found. Stop. ’ ‘ No targets. Stop. ’
The former means that you didn’t provide any targets to be built on the command line, and make couldn’t find any makefiles to read in. The latter means that some makefile was found, but it didn’t contain any default goal and none was given on the command line. GNU make has nothing to do in these situations. See Arguments to Specify the Makefile.
‘ Makefile ` xxx ‘ was not found. ’ ‘ Included makefile ` xxx ‘ was not found. ’
A makefile specified on the command line (first form) or included (second form) was not found.
‘ warning: overriding recipe for target ` xxx ‘ ’ ‘ warning: ignoring old recipe for target ` xxx ‘ ’
GNU make allows only one recipe to be specified per target (except for double-colon rules). If you give a recipe for a target which already has been defined to have one, this warning is issued and the second recipe will overwrite the first. See Multiple Rules for One Target.
‘ Circular xxx <- yyy dependency dropped. ’
This means that make detected a loop in the dependency graph: after tracing the prerequisite yyy of target xxx , and its prerequisites, etc., one of them depended on xxx again.
‘ Recursive variable ` xxx ‘ references itself (eventually). Stop. ’
This means you’ve defined a normal (recursive) make variable xxx that, when it’s expanded, will refer to itself ( xxx ). This is not allowed; either use simply-expanded variables (‘ := ’ or ‘ ::= ’) or use the append operator (‘ += ’). See How to Use Variables.
‘ Unterminated variable reference. Stop. ’
This means you forgot to provide the proper closing parenthesis or brace in your variable or function reference.
‘ insufficient arguments to function ` xxx ‘. Stop. ’
This means you haven’t provided the requisite number of arguments for this function. See the documentation of the function for a description of its arguments. See Functions for Transforming Text.
‘ missing target pattern. Stop. ’ ‘ multiple target patterns. Stop. ’ ‘ target pattern contains no `%’. Stop. ’ ‘ mixed implicit and static pattern rules. Stop. ’
These errors are generated for malformed static pattern rules (see Syntax of Static Pattern Rules). The first means the target-pattern part of the rule is empty; the second means there are multiple pattern characters ( % ) in the target-pattern part; the third means there are no pattern characters in the target-pattern part; and the fourth means that all three parts of the static pattern rule contain pattern characters ( % )–the first part should not contain pattern characters.
If you see these errors and you aren’t trying to create a static pattern rule, check the value of any variables in your target and prerequisite lists to be sure they do not contain colons.
‘ warning: -jN forced in submake: disabling jobserver mode. ’
This warning and the next are generated if make detects error conditions related to parallel processing on systems where sub- make s can communicate (see Communicating Options to a Sub- make ). This warning is generated if a recursive invocation of a make process is forced to have ‘ -j N ’ in its argument list (where N is greater than one). This could happen, for example, if you set the MAKE environment variable to ‘ make -j2 ’. In this case, the sub- make doesn’t communicate with other make processes and will simply pretend it has two jobs of its own.
‘ warning: jobserver unavailable: using -j1. Add `+’ to parent make rule. ’
In order for make processes to communicate, the parent will pass information to the child. Since this could result in problems if the child process isn’t actually a make , the parent will only do this if it thinks the child is a make . The parent uses the normal algorithms to determine this (see How the MAKE Variable Works). If the makefile is constructed such that the parent doesn’t know the child is a make process, then the child will receive only part of the information necessary. In this case, the child will generate this warning message and proceed with its build in a sequential manner.
‘ warning: ignoring prerequisites on suffix rule definition ’
According to POSIX, a suffix rule cannot contain prerequisites. If a rule that could be a suffix rule has prerequisites it is interpreted as a simple explicit rule, with an odd target name. This requirement is obeyed when POSIX-conforming mode is enabled (the .POSIX target is defined). In versions of GNU make prior to 4.3, no warning was emitted and a suffix rule was created, however all prerequisites were ignored and were not part of the suffix rule. Starting with GNU make 4.3 the behavior is the same, and in addition this warning is generated. In a future version the POSIX-conforming behavior will be the only behavior: no rule with a prerequisite can be suffix rule and this warning will be removed.
recipe for target ‘all’ failed
Ощущение, что у вас configure или что там ещё не отработал и не создал Makefile.
Makefile создан, установка идет и потом ошибка.
Не понял, у вас есть файл ″src/makefile″? Или ./configure завешрилась с ошибкой?
может дать ответ
лол. собиратель 99лвл.
Дело не в библиотеке, вы неправильно собираете. См файл README, COMPILE, BUILD и подобные, там сказано как и после чего вызывать make.
Делал по инструкции
ok, I am trying this, and wait for result
да получилось в итоге я получил разные либы и программы в bin, теперь по аналогии попробую поставить tesseract, только не понял зачем нужна папка buil.
пытаюсь скомпилировать tesseract но теперь ругатся именно на библиотеку
вернее на имя ругается, я так понимаю нужно указать это имя при cmake?
Всем привет, в итоге я выявил проблему, leptonica была не актуальной, я просто удалил папку и залил ее с гита, установил, и потом установил tesseract и на этот раз ошибок не было и в общем что бы поставить все нужно пройти по этим шагам:
Makefile:5: recipe for target ‘run’ failed
При запуске Makefile выдается ошибка "Makefile:2: recipe for target ‘all’ failed"
решила поучиться собирать проекты через мэйкфайлы. Пожалуйста, помогите разобраться all.
Recipe for target ‘.’ failed — Qt+Android
Здравствуйте. Не запускается проект Qt. Проект создан по умолчанию. В версии Qt 5.7 выводит: copy.
Recipe for target ‘main.o’ failed
Помогите разобраться где косяк Atmel Studio 7 выдает сообщения (из 18 ошибок остались 2) , в том.
CodeLite/MinGW — ошибка компиляции: recipe for target ‘all’ failed?
Установил CodeLite и компилятор MinGW. При попытке скомпилировать простейшую программу ‘hello.
Как заставить make продолжать выполнения после failed recipe?
Я знаю о замене rm соответствующей встроенной переменной $(RM), но мне нужно универсальное решение.
Choose Deafault Run Target
При запуске проекта всегда выскакивает вот это ,это к чему надо путь указать?
Spring and HttpClient: The target server failed to respond
Добрый день. У меня есть проблема с http client от apache. И так у меня есть 2 сервера которые.
Idle code blocks ошибка Target uses an invalid compiler; run aborted
idle code blocks помогите ошибка Target uses an invalid compiler; run aborted
Ошибка VBA: Run time error ‘-2147417848 (80010108)’: Method ‘Paste’ of object ‘_Worksheet’ failed
Пожалуйста, помогите! При записи макроса для копирования столбцов с одного листа на другой VBA.
VB & Oracle ошибка: Run-time error ‘3155’ ODBC—insert on a linked table ‘. ‘ failed.
Уважаемые Дамы и Господа! Столкнулся с такой проблемой: У меня есть база Oracle — Create.